METIODP

MET’s Journal of Medical, Pharmaceutical and Allied Research (MJMPAR) is official
journal of MET’s Institute of D.Pharmacy, BKC, Adgaon, Nashik. MJMPAR is a half yearly
publication is devoted to publishing reviews and research articles in the area of
Pharmaceutical Sciences and Education.

All manuscripts should be submitted in along with 'Authorship Responsibility Undertaking',
signed by all the authors of the paper via online : www.MJMPAR.net
Original signed copyright form is required to be sent to editor@MJMPAR.org or uploaded on
the submission site: www.MJMPAR.net

Authors should retain a copy of all materials submitted to the journal; the editor cannot accept
responsibility for loss or damage to submitted materials. Manuscripts will be subjected to peer
review process to determine their suitability for publication, provided they fulfilled the
requirements of the journal. After the review, manuscript will be returned for revision along
with reviewer's and /or editor's comments. The final revised manuscript should be submitted
for publication within one month after receiving the comments. 

Submission of a manuscript to MJMPAR for publication implies that the same work has not
been either published or under consideration for publication in another journal. Author/s
publishing results from in-vivo experiments involving animal or humans should state whether
due permission for conduct of these experiments was obtained from the relevant authorities
/Ethics committee / Institutional Review Board.

Manuscript preparation: Manuscripts should be concisely typed in double space in A4
sized sheets, only on one side with a 2 cm margin on all sides. The manuscript shall be
prepared in Times New Roman font using a font size of 12. Title shall be in a font size 14. All
section titles in the manuscript shall be in font size 12, bold face capitals. Subtitles in each
section shall be in font size 12, bold face lower case followed by a colon. The pages shall be
numbered consecutively with arabic numbers, beginning with title page, ending with the (last)
page of figure legends. The length of an Review/ Science Education article should not exceed
25 manuscript pages to include figures, tables and references. No abbreviations or acronyms
shall be used in the Title or Abstract acronyms, except for measurements. All the references,
figures (Fig.) and tables (Table) in the text shall be numbered consecutively as they first
appear. No sentence shall start with a numeral. Abbreviations like “&” and “etc” shall be
avoided in the paper. There shall not be any decorative borders anywhere in the text including
the title page. The entire MS Word document with graphs and illustrations pasted in it shall
not exceed 2 MB.

Manuscripts must conform to the “Uniform Requirements for Manuscripts Submitted to
Biomedical Journals. The Content of the manuscript shall be organized in the following
sequence and shall start on separate pages: title page (including author's name, affiliations and
address for correspondence), abstract (including at least 5 key words), text (consisting of
introduction, materials and methods, results, discussion, conclusion and acknowledgements),
references, figure legends, tables and figures. Titles should be short, specific, and clear.
Beginning with the first page of text, each page should be consecutively numbered. For the
Review Articles, the author(s) is absolutely free to design the paper. The Abstract section is
needed for review articles too. The article should not exceed 15 manuscript pages including
figures, tables and references. References, figures, and legends shall follow the general
guidelines described below. For all other Articles, the following format shall be strictly
followed. Title Page. The following information should appear: title of article (A running title
or short title of not more than 50 characters), authors' name, and last name. The author to
whom all correspondence be addressed should be denoted by an asterisk mark. Full mailing
address with pin-code numbers, phone and fax numbers, and functional e-mail address should
be provided of the author for correspondence. Names of the authors should appear as initials
followed by surnames for men and one given-name followed by surname for women. Full
names may be given in some instances to avoid confusion. Names should not be prefixed or
suffixed by titles or degrees.

Abstract: The abstract is limited to 300 words, and should describe the essential aspects of
the investigation. In the first sentence, the background for the work should be stated; in the
second sentence the specific purpose or hypothesis shall be provided; followed sequentially
by summary of methods, results and conclusion. No references should be cited.
Introduction: A brief background information on what has been done in the past in this area
and the importance of the proposed investigation shall be given. Introduction shall end with a
statement of the purpose or hypothesis of the study.

Material and Methods: This section may be divided into subsections if it facilitates better
reading of the paper. The research design, subjects, material used, and statistical methods
should be included. Results and discussion shall not be drawn into this section. In human
experimentation, ethical guidelines shall be acknowledged.

Results: This section may be divided into subsections if it facilitates better reading of the
paper. All results based on methods must be included. Tables, graphic material and figures
shall be included as they facilitate understanding of the results.

Discussion: Shall start with limited background information and then proceed with the
discussion of the results of the investigation in light of what has been published in the past,
the limitations of the study, and potential directions for future research. The figures and
graphs shall be cited at appropriate places.

Conclusion: Here, the major findings of the study and their usefulness shall be summarized.
This paragraph should address the hypothesis or purpose stated earlier in the paper.
Acknowledgments. Acknowledgments should appear on a separate page. Tables. Each table
should be given on a separate page. Each table should have a short, descriptive title and
numbered in the order cited in the text. Abbreviations should be defined as footnotes in italics
at the bottom of each table. Tables should not duplicate data given in the text or figures. Only
MS word table format should be used for preparing tables. Tables should show lines
separating columns with those separating rows. Units of measurement should be abbreviated
and placed below the column headings. Column headings or captions should not be in bold
face. It is essential that all tables have legends, which explain the contents of the table.
Tables should not be very large that they run more than one A4 sized page. If the tables are
wide which may not fit in portrait form of A4 size paper, then, it can be prepared in the
landscape form. Authors will be asked to revise tables not conforming to this standard before
the review process is initiated. Tables should be numbered as Table No.1 Title…., Table No.2
Title…. Etc. Tables inserted in word document should be in tight wrapping style with
alignment as center. Figures, Photographs and Images: Graphs and bar graphs should
preferably be prepared using Microsoft Excel and submitted as Excel graph pasted in Word.
These graphs and illustrations should be drawn to approximately twice the printed size to
obtain satisfactory reproduction. Specification of Legends/values in Graphs Font Arial, size-
10 pt, Italics- None] Diagrams made with Indian ink on white drawing paper, cellophane
sheet or tracing paper with hand written captions or titles will not be accepted. Photographs
can also be submitted as 'jpeg/TIFF with the resolution of 600 dpi or more' images. Figure
and Table titles and legends should be typed on a separate page with numerals corresponding
to the illustrations. Keys to symbols, abbreviations, arrows, numbers or letters used in the
illustrations should not be written on the illustration itself but should be clearly explained in
the legend. The complete sets of original figures must be submitted. Legends should be in the
present tense (e.g., 'Illustration shows ...'). Subjects' names must not appear on the figures.
Labels should contrast well with the background. Images should be uniform in size and
magnification. Illustrations should be free of all identifying information relative to the subject
and institution. Written permission for use of all previously published illustrations must be
included with submission, and the source should be referenced in the legends. Written
permission from any person recognizable in a photo is required. Legends must be double
spaced, and figures are numbered in the order cited in the text. Color prints shall be submitted
only if color is essential in understanding the material presented. Label all pertinent findings.
The quality of the printed figure directly reflects the quality of the submitted figure. Figures
not conforming to acceptable standards will be returned for revision.

Figures should be numbered as Fig.1, Fig.2 etc.; Figures inserted in word document should be
in square wrapping style with horizontal alignment as center. Resolution: Drawings made
with Adobe Illustrator and CorelDraw (IBM/DOS) generally give good results. Drawings
made in WordPerfect or Word generally have too low a resolution; only if made at a much
higher resolution (1016 dpi) can they be used. Files of scanned line drawings are acceptable if
done at a minimum of 1016 dpi. For scanned halftone figures a resolution of 300 dpi is
sufficient. Scanned figures cannot be enlarged, but only reduced. Figures/Images should be
submitted as photographic quality scanned prints, and if possible attach an electronic version
(TIFF/ JPEG). Chemical terminology- The chemical nomenclature used must be in
accordance with that used in the chemical abstracts. Symbols and abbreviations- Unless
specified otherwise, all temperatures are understood to be in degrees centigrade and need not
be followed by the letter 'C'. Abbreviations should be those well known in scientific literature.
In vitro, in vivo, in situ, ex vivo, ad libitum, et al. and so on are two words each and should be
written in italics. None of the above is a hyphenated word. All foreign language (other than
English) names and words shall be in italics as a general rule. General Guidelines for units
and symbols - The use of the International System of Units (SI) is recommended. For meter
(m), gram (g), kilogram (kg), second (s), minute (m), hour (h), mole (mol), liter (l), milliliter
(ml), microliter (μl). No pluralization of symbols is followed. There shall be one character
spacing between number and symbol. A zero has to be used before a decimal. Decimal
numbers shall be used instead of fractions.

Biological nomenclature - Names of plants, animals and bacteria should be in italics.

Enzyme nomenclature - The trivial names recommended by the IUPAC-IUB Commission
should be used. When the enzyme is the main subject of a paper, its code number and
systematic name should be stated at its first citation in the paper. Spelling - These should be
as in the Concise Oxford Dictionary of Current English.

PAGE LAYOUT
Page size Letter Portrait 8.5” X 11.0” Margins All Margins, 1” Page numbers Numbered as
per the assigned page /absolutely no break or Missed sections Indent None, Absolutely, No
Tab Footer / Headers None Title 14pt Times New Roman, bold, centered followed by a single
blank line. Text 12pt Times New Roman, full justification1.5 line spacing between
paragraphs. No indentation Tables At the end of context with rows and columns active; tables
should have individual rows and columns for each value expressed. All text should be fully
justified.

Please put all primary section titles in UPPER CASE letters (Example INTRODUCTION,
MATERIALS AND METHODS, RESULTS , DISCUSSION , ACKNOWLEDGEMENT,
REFERENCES) and subheading in both Upper and Lower Case letters (Italics). Do not
number your subtitles (for example, 1.0 Introduction; 2.0 Background; 2.1.1 are not
acceptable). Do not use the tab key to indent blocks of text such as paragraphs of quotes or
lists because the page layout program overrides your left margin with its own, and the tabs
end up in mid-sentence. References Literature citations in the text must be indicated by
Arabic numerals in superscript. Each reference separately in the order it appears in the text.
The references should be cited at the end of the manuscript in the order of their appearance in
the text. In case of formal acceptance of any article for publication, such articles can be cited
in the reference as “in press”, listing all author's involved.

References should strictly adhere to Vancouver style of citing references Format: Author(s)
of article (surname initials). Title of article. Journal title abbreviated Year of publication;
volume number (issue number):page numbers. Standard journal article (If more than six
authors, the first six shall be listed followed by et al.)

You CH, Lee KY, Chey WY, Menguy R. Electrogastrographic study of patients with
unexplained nausea, bloating and vomiting. Gastroenterology 1980;79:311-4.
Books and other monographs Format: Author(s) of book (surname initials). Title of book.
Edition. Place of publication: Publisher; Year of publication. Personal author(s)
Eisen HN. Immunology: an introduction to molecular and cellular principles of the immune
response. 5th ed. New York: Harper and Row; 1974.
Editor, compiler, as author ausser J, Colombani J, editors. Histocompatibility testing 1972.
Copenhagen: Munksgaard; 1973.
Organisation as author and publisher Institute of Medicine: (US). Looking at the future of the
Medicaid program. Washington: The Institute; 1992.
Conference proceedings: Kimura J, Shibasaki H, editors. Recent advances in clinical
neurophysiology. Proceedings of the 10th International Congress of EMG and Clinical
Neurophysiology; 1995 Oct 15-19; Kyoto, Japan. Amsterdam: Elsevier; 1996.
Dissertation: Kaplan SJ. Post-hospital home health care: the elderly's access and utilization
[dissertation]. St. Louis (MO): Washington Univ.; 1995.
Patent: Larsen CE, Trip R, Johnson CR, inventors; Novoste Corporation, assignee. Methods
for procedures related to the electrophysiology of the heart. US patent 5529 067. 1995 Jun 25.
Chapter or article in a book Format: Author(s) of chapter (surname initials). Title of chapter.
In: Editor(s) name, editors. Title of book. Place of publication: Publisher; Year of publication.
page numbers.
AUTHOR's CHECKLIST FOR SENDING PROOFS TO EDITORIAL OFFICE In
order to maintain quality and consistency in MJMPAR, we ask you to perform the following

items prior to submitting your final proof for publication:

• Scanned copy of Author's Transfer of Copyright signed by each author to be uploaded in Submission site.

• Thoroughly check the article for typographic errors, format errors, grammatical errors, in particular: spelling of names, affiliations, any symbols, equations in the context, etc.

• Provide graphs and figures in excel format, Pictures are required as high resolution images (300 dpi).

• List out the corrections made in typed format in a separate page with the proof. Authors can send the corrected proof, copyright transfer form, with covering letter to editor@MJMPARorg.
   

EdOffice:
Editor-in-Chief,MJMPAR
All enquiries can be made through e-mail: editor@MJMPAR.org